Description
Product description
albert floorotex is made of recycled polyester film.
The surface is made of a waterproof and breathable
film. The underside is made up of a spray-on adhesive
which allows the product to be slightly adherent.
- Waterproof but still breathable – water
cannot go through and underlying moisture
does not get trapped. - Protects – against scratches and other
damage - Anti-skid – mat cannot slip – no need for
any tape at the sides - Very strong material – does not tear
- Reusable – can be used several times
Instalation Instructions
•• Turn-off floor heating before laying
•• The rolls should be laid down with an
overlapping on each side by about
10 cm (4 inches)
•• Protect against direct solar radiation
•• The areas to be covered must be dry
underneath the breathable surface
protective roll.
•• The floor protective film cannot endure
a permanent pressure of more than
100 kg/m² for more than 24 hours
•• Waiting period for laying:
•• Follow the manufacturer‘s guidelines for
complete curing times. Due to variable site conditions, a site test should also be
done to ensure floor is cured.
•• Never use the mat earlier than 72 h after
the final coat has been applied.
•• Room temperature 10° – 25°C
•• Allowable room humidity 50 % – 60 %
•• The rolls should be laid down with an
overlapping on each side by about
10 cm (4 inches)
•• Protect against direct solar radiation
•• The areas to be covered must be dry
underneath the breathable surface
protective roll.
•• The floor protective film cannot endure
a permanent pressure of more than
100 kg/m² for more than 24 hours
•• Waiting period for laying:
•• Follow the manufacturer‘s guidelines for
complete curing times. Due to variable site conditions, a site test should also be
done to ensure floor is cured.
•• Never use the mat earlier than 72 h after
the final coat has been applied.
•• Room temperature 10° – 25°C
•• Allowable room humidity 50 % – 60 %
All the details included in this technical product
information are based on our best knowledge and
experiences. They do not represent a guarantee
of certain properties. It is the responsibility of the
processor to determine the suitability for a particular
purpose through his own tests and trials. Should
the adherent underside remain on the floor, we
disclaim liability.
information are based on our best knowledge and
experiences. They do not represent a guarantee
of certain properties. It is the responsibility of the
processor to determine the suitability for a particular
purpose through his own tests and trials. Should
the adherent underside remain on the floor, we
disclaim liability.
Reviews
There are no reviews yet.